Equipped with an adjustable mid/high frequency driver array, the In-Wall is able to deliver pin-point audio imaging and consistency from both vertical or horizontal positions.
By rotating the array though 90 degrees at the centre of a LCR configuration for instance, a soundstage of three Platinum In-Wall IIs will generate the seamless tonal integrity of the finest boxed systems from a stealthy in-wall location.
Technology
2 x 61/2" RDT II bass drivers
4" RDT II mid-range driver
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
Bespoke speaker terminals and footings
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Bolt through drivers: clearer sound and cleaner aesthetics
Rigid cabinet construction made from 25 mm MDF with steel back
Extensive internal bracing using thick MDF cross bracing techniques
Specifications
System Format
3 Way — 4 Driver
Frequency Response (-6 dB - IEC 268-13)
52 Hz — 100 kHz
Sensitivity (1W@1M)
90 dB
Maximum SPL
117 dBA (pair)
Nominal Impedance
4 ohms (3.7 ohms min. @ 2.8 KHz)
Power Handling (RMS)
200 W
Recommended Amplifier Requirements
100 — 200 W
Cabinet Design
Sealed Cabinet
Drive Unit Complement
2 x 61/2" RDT II bass drivers
1 x 4" RDT II mid-range driver
1 x MPD high frequency transducer
Mid / H.F Crossover Frequency
4.1 kHz 3rd Order (18 dB/Octave)
Bass / Midrange Crossover Frequency (Hz)
700 Hz/ 2nd Order (12 dB/Octave)
Fixing Type
10 x Tri-Grip dog leg type fixing system
Overall Dimensions (Including Grille (H x W x D))
1207 x 332 x 105.5 mm (47 9/16 x 13 1/16 x 4 4/16")
Cut-Out Dimensions
1179 x 302 mm (467/16 x 117/8")
Mounting Depth
97.5 mm (313/16")
Weight (each)
27 kg (59.4 lb)
Sold As
Single Unit