אולפן ההקלטות
ספר פוטושופ חדש!

לקוחות יקרים - בכדי שנוכל לתת לכם את השירות הטוב ביותר, אנו ממליצים לתאם מראש את הגעתכם.

משלוח חינם לכל חלקי הארץ | להזמנות: 02-6438272, 02-6438437 | עד 12 תשלומים ללא ריבית


Audioengine A2Plus

זוג רמקולים שולחניים מוגברים

Features
- Built-in analog power amplifiers
- Dual analog audio inputs
- USB audio input
- Hand-finished wood cabinets
- Variable audio output
- Custom Kevlar woofers and silk tweeters
- Power-saving idle mode
- Cables included
- Works with Mac or PC, no software to install
- Designed for desktop use, but will fill a room

Works with
- iDevices and all music players
- Internet radio and network music systems
- Desktop computers, laptops, notebooks
- Flat panel TVs with an analog output
- CD and DVD players
- Videogame consoles
- Digital radio and satellite receivers
- All products with 1/8" mini-jack or RCA outputs!

Finishes
Red, White, Black

Specifications
Type
2.0 powered (active) multimedia desktop speaker system

Amplifier type
Dual class AB monolithic

Power output
60W peak power total (15W RMS / 30W peak per channel), AES

Drivers
2.75" Kevlar woofers, 3/4” silk dome tweeters

Inputs
3.5mm stereo mini-jack, RCA, USB

Outputs
RCA variable line-out

Input voltages
110-240V 50/60Hz auto-switching

SNR
>95dB (typical A-weighted)

THD+N
<0.05% at all power settings

Crosstalk
-50dB

Freq. response
65Hz-22kHz ±2.0dB

Input impedance
10K ohms unbalanced

DAC
TI/Burr Brown PCM2704C

Input bit depth
up to 16 bits native

Input sample rate
up to 48KHz native

USB device class
type 1.1 or above

Protection
Output current limiting, thermal over-temperature, power on/off transient protection

Dimensions (each)
6”(H) x 4”(W) x 5.25”(D)

Weight (LEFT speaker)
1.6Kg/3.55lbs

Weight (RIGHT speaker)
1.4Kg/3.15lbs

Shipping weight
4.6kg/10lbs per pair

Shipping box dims
10.5” (H) x 15” (L) x 7” (W)

Materials and Construction
6.35mm thick MDF cabinets
3/4" silk dome tweeters with neodymium magnets
2.75" Kevlar woofers with advanced voice coils

Included Accessories
Speaker wire (16AWG), 2 meters (~6.5 feet)
Power supply
AC power cord
Mini-jack audio cable, 1.5 meters (~5 feet)
USB cable, 1.5 meters (~5 feet)
Microfiber speaker bags
Microfiber power supply bag
Microfiber cable bag
Setup guide
Product line brochure

Custom Built
Audioengine designs and manufactures our own tweeters, woofers, and many other critical components. In other words, these are not "box built" speakers with off-the-shelf parts but entirely custom-designed to our specifications. What we do not fabricate directly in our speaker factory we have custom-made to our designs (parts such as toroidal transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than traditional AV stereo receivers and passive speakers.

Based on Studio Monitor Designs
Studio monitor speakers are used by producers and engineers in recording and production studios. They are designed with a theoretical flat frequency response which allows the engineer to create a final mix in such a way that the recorded music will sound good on most other speakers. Although Audioengine speakers are not designed to be up-close "nearfield" studio monitors, we do carry over much of the same higher-end technology, components, and design philosophy for Audioengine speakers.

Drivers
Audioengine uses audiophile quality, ferro fluid cooled, silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The custom woofers are Kevlar woven glass aramid composite with rubber surrounds. Kevlar is obviously very strong, which means that the woofer retains its shape when being driven at high levels. The speaker materials and construction are very robust, therefore speaker grills aren’t needed. In other words, we did our homework on the speaker drivers and they will sound and look great after many years of use.

Cabinets
To minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is used to reduce unwanted sound reflections inside the cabinet. All cabinet edges are rounded which look great and reduce high-frequency diffraction effects on the front baffles. Each cabinet contains tuned, front-port slots. Both speakers are tuned and tested together and sold in pairs.

Power Amplifier
The amplifiers in Audioengine speakers are located in the left speaker and are a very conservatively rated analog design. Each subsystem is tuned together for all models, which provides a much more efficient system requiring less power than passive speakers and separate amplifiers. Circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection (a good thing).

Shielding
Both drivers are magnetically shielded and allow the user to place the speakers within a few inches of a video monitor. This shielding also offers protection for hard-drive digital music players.

לאתר היצרן: לחץ כאן
 

הוסף למוצרים שלי

מחיר: ₪1,390

     
 
Avi Yaffe Jerusalem Recording Studios Ltd., Since 1963 הוקם על-ידי סטודיו דקל - עיצוב אתרים